Countdown Timer - hanseatic HBCO7010PA1 Gebrauchsanleitung

Page EN-26 The clock
88:88
c
888
(17) (16)
1. Tap the sensor (17).
The indicator showing the current hour will
flash.
2. Turn the temperature controller (13) until
the display (16) shows the desired start
hour ( - ).
0 23
3. To save the setting, tap the
sor (17) again.
The indicator showing the current minute
will flash.
4. Turn the temperature controller (13) until
the display (16) shows the desired start
minute ( - ).
0 59
5. Do not tap the hour sensor again, but
instead
– select the desired function, temperature
and cooking time (see "Start the cooking
process" on page EN-22) and
– start the cooking process.
The hourglass symbol
tom right of the display to indicate that you
have set a start time. When the start time is
reached, you will hear a signal tone and the
cooking process will start.
(13)
sen-
appears at the bot-

Countdown timer

Your oven can remind you to start cooking,
or tell you when your eggs are cooked. To
do this, enter a period of
After the time has elapsed, you will hear 10
signal tones.
Please note that the countdown timer
does not switch the oven or hob on or off.
(18) (16)
88:88
c
888
1. Tap the sensor (18).
The indicator showing the current hour will
flash.
2. Turn the temperature controller (13) until
the display (16) shows the desired num-
ber of hours ( - ).
0 9
3. To save the setting, tap the
sor (18) again.
The minute indicator will flash.
4. Turn the temperature controller (13) until
the display (16) shows the desired num-
ber of minutes ( -
0 59
5. Tap the sensor (14).
The countdown begins.
The display will show the remaining time.
After the set time has elapsed, you will
hear 10 signal tones.
To cancel the countdown, tap the
sensor (15) twice.
to hours.
0: 0 1 9: 5 9
(13)
sen-
).