Medela Harmony Gebrauchsanweisung Seite 7

How to assemble your Harmony pump set
Attach connector and
breastshield.
Screw the connector onto the
bottle.
*If the handle components have been disassembled
Place the oval shaped base
of the stem into the dia-
phragm. Ensure that the oval
shaped bases match.
Place membrane onto valve.
*
Insert base of handle assembly into opening
on connector until it locks into place.
Place diaphragm and stem into pump handle
and press down firmly around entire edge to ensure proper seal.
Push the valve onto the
connector. Note: Ensure sidewise
position of the valve.
7