Operation - EuroLite AKKU Mini IP UP-4 QCL IP Spot Bedienungsanleitung

After charging and switching on, the device is ready for operation. The display indicates the last operating mode.
The operating modes can be selected by means of the display and the control buttons. All settings remain stored
even if the device is switching off.
Menu structure
The operating mode is set via the display and the buttons MENU, UP, DOWN and ENTER. Press the MENU button
so many times until the desired operating mode is indicated in the display. Change the values to be set or options
with the UP or DOWN buttons. For modes with adjustable speed, press ENTER to display this option. Details of the
individual menu items from the table can be found below.
Note: The display switches off automatically after about 10 seconds without any button being pushed. Push any
button to reactivate it.
Mode
Buttons
Battery status
IR remote control
Brightness Rot
Brightness Green
Brightness Blue
Brightness White
Strobe
Preset colors
Color change
Color fade
Pulsing color change
Sound control

OPERATION

Display
MENU UP/DOWN
U_XXX
IrYE
IrYE
Irno
rXXX r0-255
GXXX G0-255
bXXX b0-255
uXXX u0-255
F000-009
FXXX
F010-255
CLXX CL01-08
CCXX CC00-99
dEXX dE00-99
CPXX CP00-99
SUnX SUn0-9
17 • EN
Function
Battery charge status
100 - battery fully charged
0 - battery discharged
IR remote control on
IR remote control off
Red dark > bright
Green dark > bright
Blue dark > bright
White dark > bright
No strobe effect
Strobe effect with increasing speed
Constant lighting in one of 8 colors
Color change with increasing speed
Color fade with increasing speed
Pulsing color change with increasing
speed
Sound controlled color change with
decreasing microphone sensitivity