General Information And Safety; Intended Use; Non-Intended Use, How To Avoid - HARTING 09 99 000 0990 Betriebsanleitung

General information and safety

NOTICE
A ► marks a feedback or control option. This
information can help you to successfully
complete an installation step.
4. General information and safety
This chapter defines the proper and inten-
ded usage for the crimping tool and gives
general safety instructions. This information
must be observed during the tool's commis-
4.1 Proper and intended use
This crimping tool should be used exclusively
for producing crimped connections, which
connect stranded wires with contacts from
the Han C, Han D
® ®
(for details of conductor cross-sections that
can be processed, ⇨ Chapt. 8, p. 14).
Combined with crimping die and locator, this
crimping tool must be used exclusively in the

4.2 Non-intended use, how to avoid

The most critical potential for misuse is
when the operator reaches near the repla-
ceable crimping die while the crimping tool
is running.
Caution: Danger of being crushed!
Instruction manual tool 09 99 000 0990 / Betriebsanleitung Werkzeug 09 99 000 0990
Notice
Notice indicates that there is a risk of damage to property.
Ignoring such notes can lead to a worsening of the operating
conditions.
and Han E Han series
®
Text highlighted in blue indicates references
to other chapters or URLs from other web-
sites.
sioning (⇨ Chapter 7, p. 13), operation and
maintenance.
manner and for the purposes described in
this document. All other uses of the crimping
tool are not intended and exclude liability of
the manufacturer and the supplier for any re-
sulting damage; the operating company alo-
ne bears the risk.
Avoid:
• To minimise the risk, switch off the batte-
ry crimping tool before reaching into the
area of the crimping die.
• Only use components and accessories that
are specified as suitable in this document.
7