HARTING 09 99 000 0990 Betriebsanleitung Seite 20

HARTING Battery crimping tool 09 99 000 0990
Lever:
Level III
⑤
Lever:
Level I
⑥
Lever:
Level I
⑦
20
5. Crimping
6. Open the crimping die again!
7. Remove the cable end with the crimped
contact and carry out a visual inspection.
Observe the following note!
NOTICE
completely open!
Make sure that contact and positioner fit
together when crimping.
Do not remove the fully crimped contact
too soon, otherwise you will damage the
contact.
Wait until the crimp die is completely open
before removing it.
HARTING Electric GmbH & Co. KG
Remove contact
only when the
crimping die is