Crimping - HARTING 09 99 000 0990 Betriebsanleitung

HARTING Battery crimping tool 09 99 000 0990

8.2 Crimping

WARNING!
①
②
③ ④
18
Risk of injury from bumping and crushing!
The battery crimping tool may only be set up and operated
in a technically perfect, complete and functional condition.
Work carefully and be aware of safety and hazards. Wear
protective goggles when working with the crimping tool. Do
not wear loose clothing and/or long, open hair. These could
get caught in the crimping tool.
Interrupt the work process if you notice any faults in the crim-
ping tool. Correct the fault before you continue processing.
Only trained personnel may use the crimping tool or work
on it. Two or more operators must not work on or with the
same crimping tool at the same time.
Before starting to crimp: Check whether
you have selected the correct locator for
processing the selected contact type. The
locator automatically selects the required
recesses for crimping your contact type.
Locator and contact dimensions
Posi-
tion
①
②
③
④
1. Remove the battery and attach the
positioner suitable for your contact type.
Contact
type
Han D 0.14 ... 1.5 mm²
®
Han E 0.5 ... 4 mm²
®
Han C 1.5 ... 4 mm²
®
Han C 4 ... 10 mm²
®
HARTING Electric GmbH & Co. KG
Diameter