Turning The Camera On; Checking The Battery Power - Nikon Lite Touch Zoom 100ED Bedienungsanleitung

Turning the camera on

Open the slide cover.
Once you open the cover in the direction of the arrow, the camera is
turned on, the built-in flash pops up, and the lens extends out to the
wide-angle position.
Slide the cover until it clicks.
When closing the cover, first slide it slightly in to start lens retraction.
When the lens is completely retracted, slowly close the cover.

Checking the battery power

Check the Low Battery Power indicator (
the LCD panel.
Lite Touch Zoom 100ED
If " " is not indicated, battery power is sufficient.
If " " is blinking, or all the indicators on the LCD panel do not
appear, the battery is exhausted. Replace it with a new one.
Always check the battery condition before shooting.
It is recommended to carry spare batteries with you. The batteries may
be difficult to obtain in some areas.
Lite Touch Zoom 100ED QD
Preparations
E
) on
13