Turning The Camera On; Checking The Battery Power - Nikon Lite Touch Zoom 140 ED Bedienungsanleitung

Turning the camera on

Checking the battery power

Downloaded from www.Manualslib.com
Open the slide cover.
Once you open the cover in the direction of the arrow, the camera is
turned on, the built-in flash automatically pops up, and the lens extends
out to the wide-angle position.
Slide the cover until it clicks.
When closing the cover, first slide it slightly in to start lens retraction.
When the lens is completely retracted, slowly close the cover.
Make sure that the Low Battery Power indicator
( ) is not appeared on the LCD panel.
Lite Touch Zoom 140ED
If " " is not appeared, battery power is sufficient.
If " " is blinking, or all the indicators on the LCD panel do not
appear, the battery is exhausted. Replace it with a new one.
Always check the battery condition before shooting.
It is recommended to carry spare batteries with you. The batteries may
be difficult to obtain in some areas.
manuals search engine
Lite Touch Zoom 140ED QD
Preparations
E
13