Connections, Operating And Display Elements - Cameo MOVO BEAM 200 Bedienungsanleitung

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

5
1 POWER IN
Blue Power Twist mains input socket. Operating voltage 100–240 V AC/50–60 Hz. A suitable
power cable is included.
2 POWER OUT
White Power Twist mains output socket for supplying power to additional Cameo spotlights (for
maximum output current, see label on back of housing).
3 DMX IN
Male 3-pin and 5-pin XLR sockets for connection to a DMX control device (e.g. DMX console). Use
the sockets only as an alternative.
4 DMX OUT
Female 3-pin and 5-pin XLR sockets for sending the DMX control signal. Use the sockets only as
an alternative.
5 FUSE
Fuse holder for 5 x 20 mm micro fuses. IMPORTANT: Replace the fuse only with a fuse of the
same type and of the same value (see stamp on back of device). In the event of repeated fuse
failure, please contact an authorised service centre.
BACK VIEW BASE
2
1
4
3
11