Cameo MOVO BEAM 200 Bedienungsanleitung Seite 17

DEVICE INFORMATION (INFO)
Starting from the main display, press the rotary-push encoder to enter the main menu (MENU).
Turn the encoder to select the Info menu for device information and press the encoder.
Settings (bold = factory setting)
Select by turning the encoder, confirm by pressing, change value or status by turning, confirm
by pressing. Back with <=.
Display Display settings
Signal Operational status on
Fail control signal
interruption
<=
Flip Floor Use
Rig Use
OFF Timer 1 Minute Off
Always On
Intensity 001–010
<=
Hold Value Last command is
retained
Run Scene 1 Activates Scene
1
Black Out Activates blac-
kout
No display rotation
Display is rotated
through 180° (e.g. for
overhead installation)
Deactivation of display
illumination after approx.
1 minute without input
Display lighting perma-
nently on
Display brightness
17