Lc-Display - Cameo MOVO BEAM 200 Bedienungsanleitung

Control: DMX
6
25C
6. LC DISPLAY
The illuminated LC display shows the currently activated operating mode (main display), the menu
items in the main menu and the numerical value or operational status and options in the corre-
sponding menu items in the submenus. If there is no input for approx. one minute, the display
automatically returns to the main display. Note regarding the main display in operating modes
with external control: As soon as the control signal is interrupted, the characters in the display
begin to flash. When there is a control signal again, the flashing stops.
7. ROTARY-PUSH ENCODER
Rotary-push encoder for navigating in the editing menu and for adjusting system settings and
changing values in the corresponding menu items. Starting from the main display, press the
encoder to enter the main menu. Select the individual menu items in the main menu (Control,
Settings, Info, Service, Quicklight) and in the submenus by turning the encoder and confirm the
selection by pressing the encoder. Change the value or status in a menu item by turning the
encoder and confirm the change by pressing the encoder. To move up one level in the menu
structure, select the arrow symbol <= and confirm by pressing the encoder.
12
DMX Address
001
4 CH Mode
FAN: Normal
BACK VIEW BASE
7