Connecting External Calls To Another Mobile Unit; Holding Conference Calls; Call Duration Display - AUDIOLINE DECT6500B Bedienungsanleitung

If an external call comes in while you are making an internal call, you will hear the base
station ringing and the caller's number will be shown in the display of the mobile units,
provided that caller display (CLIP) is available. End the internal call with the
button and accept the external call by means of the call button
mobile units.
4.7

Connecting external calls to another mobile unit

If you have accepted an external call on one mobile unit, you can forward the external
call to another mobile unit. To do this, press the
required mobile unit. After the internal call has been accepted at the other mobile unit,
you have the following options:
A. Consultation: You can now speak to the internal subscriber. To return to the
external call, press the left display button twice (OPTIONS -> OUTSIDE CALL).
B. Forward the call: Press the OPTIONS display button. Select the TRANSFER
function and press the OK display button.
4.8

Holding conference calls

An external call can be connected to a further internal subscriber as a conference call.
In this way, two mobile units can talk to the external caller simultaneously.
Establish the required connection with the external subscriber.
Then call the internal mobile unit. To do this, press the OPTIONS display button
and choose the INTERCOM function. Press the number of the required mobile
unit. You can also select the required mobile unit with the cursor and make the
connection with the OK display button. If the internal call is not accepted, press the
CANCEL display button and you will be connected to the external subscriber once
more.
If the internal call is accepted by the selected mobile unit, press the OPTIONS
display button again and choose the CONFERENCE function. Both internal mobile
units will now be connected to the external subscriber.
To end the conference call, press the OPTIONS display button on one of the
mobile units. Then select the EXIT CONF. function and confirm with OK. Only one
mobile unit will then remain connected to the external subscriber. The call can be
terminated here with the
4.9

Call duration display

The call duration in minutes and seconds is shown in the top left of the display during a
call. The call duration will still be retained in the display for a few seconds after the call
has been ended. This indication can be cancelled prematurely with the OK display
button.
Your telephone remembers the times of all the calls so that you can subsequently see
the duration of the last call and a summary of the call times for all calls that have been
dialled and received.
- Operation -
INT
button and then the number of the
button.
on one of the
47