Making An Internal Call; Connecting External Calls To Another Handset; Adjusting The Receiver Volume - AUDIOLINE DECT 4100B Bedienungsanleitung

4.4

Making an internal call

Int
Press the
handset.
The internal number 1 or 2 appears in the display of the selected handset
and the call can be accepted by means of the call button
Internal calls are ended by means of the call button
Note: If you receive an external call while you are making an internal call,
you will hear several short signal tones. The number of the caller will be
shown in the display if caller ID (CLID) is available. When the internal call
has been completed, the external call can be taken on any handset.
4.5

Connecting external calls to another handset

If you have accepted an external call on one handset, you can forward the
external call to another handset. To do this, press the
internal number 1 or 2 of the required handset. After the internal call has
been accepted at another handset, you have the following options:
A. Consultation / Brokering: You can now speak to the internal
subscriber and return to the external caller by pressing the
You can switch between the external and the internal call as many times
as you like in this way.
B. Forward the call: The external call is forwarded to the handset called
by pressing the call button
4.6

Adjusting the receiver volume

There are three volume levels available to you if you should want to
change the receiver volume on the handset.
Press the button during a call repeatedly to change the receiver
volume. The selected volume will be shown in the display.
= Loud
38
- Operation -
button and the internal number 1 or 2 of the required
on the first handset.
= Medium
.
.
Int
button and the
Int
= Soft
button.