R Signal Button/T-Net; R" Button On Private Exchanges; R" Button And The Deutsche Telekom T-Net; Using Pause - AUDIOLINE DECT6500B Bedienungsanleitung

- Operation -
4.18

R Signal button/T-NET

You can use the "R" signal button on your telephone on private exchanges and when
using DEUTSCHE TELEKOM's T-Net functions. To do this, press the OPTIONS display
button and choose SEND R and OK during a call.

4.18.1 "R" Button on private exchanges

If you have connected your telephone to a private exchange, you can use all the
facilities such as call transfer, automatic recall, etc. The "R" signal button gives you
access to these facilities. The FLASH time "100ms" will be required on a private
exchange (Adjustment, see 9.3). You can find out from the dealer from whom the
equipment was purchased whether your telephone will work on your private exchange
without any problems.

4.18.2 "R" Button and the DEUTSCHE TELEKOM T-Net

Your AUDIOLINE telephone supports the most important DEUTSCHE TELEKOM
added value functions (e.g. brokering, call waiting, three-way conference, etc.). The T-
Net works using the "FLASH 300ms" setting. (Adjustment, see 9.3). Please contact
DEUTSCHE TELEKOM to gain access to T-Net functions.

4.18.3 Using Pause

With private exchanges, it is necessary to dial a certain number (e.g. "9" or "0") in order
to obtain a dialling tone for an outside line on the extension. With some, older private
exchanges, it takes some time before the dialling tone can be heard. Especially for
these private exchanges, an automatic pause can be inserted after connecting to the
outside line so that you can dial directly without waiting for the dialling tone.
Entering a pause when dialling manually
Press and hold the redial button for 2 seconds between the number for the
outside line and the actual telephone number. The letter P will appear in the display.
After connecting to an outside line your telephone will wait for 3 seconds before dialling
the actual telephone number.
The pause can also be saved with numbers in the phone book.
NOTE: If an automatic outside line code is activated, the pause will be inserted
automatically. You will find more information in Chapter 9.6.
51