Making Calls; Using Two Handsets; Making An Internal Call; Connecting External Calls To Another Handset - AUDIOLINE STUDIO 80-B Bedienungsanleitung

4.3

Making calls

1. Enter the required telephone number with a maximum of 32 digits using the number pad.
As the display is only capable of showing 12 digits, in the case of longer phone numbers
only the last 12 digits are displayed.
Note: If you have entered a number incorrectly, you can delete the number by repeatedly
/
C
pressing the button. The number is completely deleted by pressing the
long time.
2. Press the call button
Note: You can also get a dialling tone by first pressing the call button
of your required phone number, your telephone will dial the number directly. With this method of
making a call, it is not possible to correct individual digits in the number in the manner described
above.
4.4

Using two handsets

The two handsets have the internal numbers 1 and 2. This internal number is shown on the right-
hand side of the display. Incoming calls are signalled on both handsets. If the other handset is
already using the external line, the indicator light on the receiver will illuminate on both handsets.
In this case, it is not possible to make a further external call.
4.4.1

Making an internal call

When you have connected multiple handsets to a base station, you will be able to make internal
calls.
To do this, press the
accepted with the call button
4.4.2

Connecting external calls to another handset

If you have accepted an external call on one handset, you can forward the external call to
another handset. To do this, press the
handset.
If there should be no reply from the handset called, you can take the call back with the
button.
After the internal call has been accepted at the other handset, you have the following options:
A. Consultation / Brokering: You can now speak to the internal subscriber and return to the
external caller by pressing the
call as many times as you like in this way.
B. Forward the call: The external call is forwarded to the handset called by pressing the call
button on the first handset.
- Operation -
and the required connection will be made.
button and then the number 1 or 2 of the required handset. The call is
on the handset called.
button and then the number (1 or 2) of the required
button. You can switch between the external and the internal
/
C
button for a
. On entering the digits
47