Making An Internal Call; Connecting External Calls To Another Mobile Unit; Holding Conference Calls - AUDIOLINE DECT3300 Bedienungsanleitung

9.2

Making an internal call

When you have connected multiple mobile units to a base station, you will be able to make
internal calls.
To do this, press the
call is accepted with the call button
If an external call comes in while you are making an internal call, you will hear a series of
short signal tones and you will see the number of the caller in the display, if this is available.
End the internal call and accept the external call by means of the
mobile units.
9.3

Connecting external calls to another mobile unit

If you have accepted an external call on one mobile unit, you can forward the external call to
the other mobile unit. To do this, press the
required mobile unit.
If there should be no reply from the mobile unit called, you can take the call back with the
button.
After the internal call has been accepted at the other mobile unit, you have the following
options:
A. Consultation / Brokering: You can now speak to the internal subscriber and return to
the external caller by pressing the
internal call as many times as you like in this way.
B. Forward the call: The external call is forwarded to the mobile unit called by pressing the
button on the first mobile unit.
9.4

Holding conference calls

An external call can be connected to a further internal subscriber as a conference call. In this
way, two mobile units can talk to the external caller simultaneously. Establish the required
connection with the external subscriber. To do this, press the
number of the required second mobile unit.
When the second internal subscriber has accepted the call, hold the
2 seconds and all three subscribers will be connected together on a conference call.
During a conference call, you can put the external subscriber on hold with the
and then switch back again to the conference call with the
The conference call can be terminated by one of the internal subscribers hanging up.
- Multiple mobile units -
button and then the number 1 or 2 of the required mobile unit. The
on the mobile unit called.
button. You can switch between the external and the
button and then the number (1 or 2) of the
button and then the
button (press for 2 seconds).
button on one of the
button pressed for
button
55