Connecting External Calls To Another Handset; Holding Conference Calls; Adjusting The Receiver Volume - AUDIOLINE DECT 4800B Bedienungsanleitung

4.5

Connecting external calls to another handset

If you have accepted an external call on one handset, you can forward the external
call to another handset. To do this, press the
the required handset. After the internal call has been accepted at the other handset,
you have the following options:
A. Consultation / Brokering: You can now speak to the internal subscriber and
return to the external caller by pressing the
the external and the internal call as many times as you like in this way.
B. Forward the call: The external call is forwarded to the handset called by
pressing the call button
4.6

Holding conference calls

An external call can be connected to a further internal subscriber as a conference
call. In this way, two handsets can talk to the external caller simultaneously.
Establish the required connection with the external subscriber. Then press the
button and the internal number of the second handset required. When the second
internal subscriber has accepted the call, press and hold the
seconds and all three subscribers will be connected together on a conference call.
The messages INT and EXT will appear in the display. The conference is ended by
one of the internal participants hanging up.
4.7

Adjusting the receiver volume

There are three volume levels available to you if you should want to change the
receiver volume on the handset.
Press the selection buttons during a call to change the receiver volume.
The selected volume will be shown in the display.
= Loud
- Operation -
on the first handset.
= Medium
button and then the number of
button. You can switch between
= Soft
button for 2
71