Installing The Flue Screen - hanseatic SY-103A6-P1-C59-L122-600 Gebrauchsanleitung

Installing the flue screen

(6)
1. Screw the wall bracket for the upper flue
screen (6) into the prepared wall plugs us-
ing 2 round-head screws (10).
2. Push the upper part (2) of the flue screen
halfway into the lower part (3) of the flue
screen.
(2)
3. Place the retaining plate (7) onto the lower
flue screen (3) so that it lines up with the
chamfers on the inside. (Screws and elon-
(3)
gated holes should point upwards).
4. Turn two plate screws (8) from the outside
through the retaining plate (7) and the
lower flue screen (3). Tighten the screws
somewhat, but only loosely.
5. Place both parts (2) and (3) of the flue
screen onto the exhaust hood (1), with the
closed side of the flue screen facing for-
ward.
Page EN-15
Assembly
(7)
(8)
(3)