Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Before getting started
• Read chapter "Safety" on page EN-4 and
all the safety notices.
• Install the exhaust hood as described in
chapter "Montage" on page EN-12.
(20)
(21)
(22)
Switching on the appliance
The fan has three settings: (21)
medium and (23)
fast.
• To switch the appliance on, press the but-
ton for the desired fan setting.
Changing the fan setting
• To change the fan setting, press the but-
ton for the (other) desired fan setting.
Switching off appliance
• To switch the appliance off, press the I/0
button (20).
Lighting
Your exhaust hood is equipped with two LED
lights. The lighting can be switched on or off
independently of the fans.
To switch the lighting on or off, press the
Risk of injury!
■ Should one of the LEDs stop working,
it must be changed by an authorised
service technician.
– Note for the service technician:
The light source is exchangeable and may
only be exchanged by an authorized specialist!
(23)
(24)
Activated charcoal filter
• When using the appliance for air circula-
tion, only do so with activated charcoal
filters inserted.
• If neighbours complain about odours, it may
be a good idea to insert activated charcoal
filters for exhaust air operation, too.
slow, (22)
• For the source of supply, please see chap-
ter "Our Service Centre" on page EN-23.
• To insert, see "Inserting/replacing activat-
ed charcoal filters" on page EN-20.
Operation
button (24).
WARNING
This exhaust hood requires LEDs
with the ILCOS D-Code
DBR-2/65-H-64 110–240 V~, 2 W.
Page EN-17
Werbung
Inhaltsverzeichnis
