Installation; Installing The Console; Filling The Cooling System - EMS SWISS LITHOCLAST TRILOGY Gebrauchsanweisung

3. INSTALLATION

Please make sure that you have all the required parts
and tools to complete the installation of your device prior
to starting work.
Refer to the Packing List.
Follow the instructions in the indicated order.

3.1. INSTALLING THE CONSOLE

1.
cart (optional) designed for the console.
2.
3. Install the Stone catcher holder.
Do not place anything on the top cover of the
console.
The console must be placed in a properly venti-
lated place
Figure 4
8

3.2. FILLING THE COOLING SYSTEM

To avoid interruptions during treatment, make sure
that the cooling liquid is above the minimum level
described below.
Figure 5
Do not tilt the console more than 10 degrees when
there is water in the cooling system.
Figure 6
1. To remove the air vent plug, push the grey ring and
pull the air vent simultaneously.
Figure 7