Toshiba MML-AP0074NH-E Betriebsanleitung Seite 20

Every day combined timer (setting both ON
and OFF timer simultaneously and activate
every day.)
This feature is useful when you want to use combined
timer at the same time every day.
9
Setting combined TIMER
1. Press the ON TIMER
2. Press the OFF TIMER
timer.
3. Press the SET
SET
4. After step 3, an arrow mark (
3 seconds and during this fl ashing, press the SET
button.
• During the every day timer is activating, both arrows
( , ) are indicated.
Cancel the timer operation
Press the CLR button.
CLR
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF
timer) clock display is disappeared so as to show the
setting time. To see the present time, press SET button
briefl y and the present time is displayed about 3 seconds.
Q High power operation
High power (Hi-POWER)
• The Hi-POWER (high power operation) mode
automatically controls room temperature, airfl ow and
operation mode so that the room is quickly cooled in
summer and warmed in winter.
PRESET
QUIET
SWING
Setting Hi-POWER mode
1
Hi-POWER button
Press the Hi-POWER button after starting any
operation. At the same time, the "Hi-POWER" mark
on the remote controller is indicated.
Cancelling Hi-POWER mode
1
Hi-POWER button
Press the Hi-POWER button once again.
At the same time, the "Hi-POWER" mark on the
remote controller goes out.
18-EN
1112750104.indb 18
button to adjust the ON timer.
ON
button to adjust the OFF
OFF
button.
or ) fl ashes for about
FAN
TEMP
MODE
COMFORT
SLEEP
FIX Hi-POWER
1
• The Hi-POWER mode cannot be activated in the
DRY and FAN ONLY operation and when the
ON TIMER operation is reserved.
• Hi-POWER mode is not available for group control.
When Hi-POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi-POWER mode will not be performed. Please
cancel the Hi-POWER mode.
Q Quiet operation
SET
• The QUIET mode provides quiet operating status
by automatically setting the fan speed to the lowest
speed.
PRESET
QUIET
SWING
Setting QUIET mode
1
QUIET button
Press the QUIET button after starting any operation.
At the same time, the
Cancelling QUIET mode
1
QUIET button
Press the QUIET button once again.
At the same time, the
controller disappears.
The QUIET mode cannot be activated in the
operation.
NOTE
Under certain conditions, the quiet operation may not
provide adequate cooling or heating due to the feature
of quietness.
– 18 –
Owner's Manual
CAUTION
FAN
TEMP
MODE
COMFORT
SLEEP
1
FIX Hi-POWER
mark is indicated.
mark on the remote
CAUTION
DRY
12/8/2559 BE 5:07 PM