Redmond RMC-M4510 Bedienungsanleitung Seite 20

Wipe the housing of the appliance with a soft, damp cloth. Rinse the inner bowl with warm
soapy water and dry thoroughly. An odour on first use of the appliance is normal and does not
indicate a malfunction. In such case, clean the appliance, following "Cleaning and Maintenance".
II. MULTICOOKER OPERATION
To adjust the current time
Plug in the appliance. Press and hold "Час/+" or "Мин/–" buttons. Current time indicator will
start flashing. Use "Час/+" button to adjust the hour value and "Мин/–" button to adjust the
minute value. The hour value increases irrespective of the minute value. After the maximum
value is reached the adjustment starts again. Press and hold the corresponding button down
to scroll through the digits. After setting is complete do not press the buttons on the panel for
5 seconds. Settings will be saved automatically.
Disabled audible signals
To disable audible signals press and hold "Меню" button in any mode. The disabled audible
signals indicator will be flashing. To enable audible signals press and hold "Меню" button again.
To adjust cooking time
REDMOND RMC-М4510 enables to adjust cooking time for every programme, except for
"ЭКСПРЕСС". Adjustment increments and range depend on the selected programme.
After an automatic programme is selected and "Меню" button is pressed, use the "Час/+" button,
to adjust the hour value and "Мин/ –" button to adjust the minute value. The hour value changes
irrespective of the minute value. After the maximum value is reached the adjustment starts
again. Press and hold the corresponding button to scroll through the digits.
In some automatic programmes the cooking time countdown starts only after the appliance
reaches the set temperature. For example, if you pour cold water and set "НА ПАРУ" for 5
minutes, the programme will start to countdown only after water comes to a boil and sufficient
amount of steam is generated in the bowl. In "МАКАРОНЫ" the time starts to countdown after
water comes to a boil and "Старт" is pressed again.
"Time Delay"
"Time Delay" function allows adjusting the time by which the dish will be ready (including the
programme time). Maximum time of delay is 24 hours. Default time of delay comprises the
programme time and the time required to enter the operational parameters (if provided by
the factory settings of the programme). A programme can be delayed by 1 minute increments.
To adjust the time of delay after selecting of an automatic programme press "Отсрочка" button.
To increase the hour value press "Час/+" button. To adjust the minute value press "Мин/–" button.
The hour value changes irrespective of the minute value. After the maximum value is reached
the adjustment starts again. Press and hold the corresponding button to scroll through the digits.
20
All manuals and user guides at all-guides.com
"Keep Warm"
This function automatically activates at the end of cooking, and keeps the food warm at 70-
75°С for 12 hours. The "Подогрев", "Отмена/Разогрев" indicators and direct countdown are lit
on the display. To disable "Keep Warm" press and hold "Отмена/Разогрев" button.
"Keep Warm" disabled in advance
To enable "Keep Warm" function at the end of a programme is not always desirable. REDMOND
RMC-М4510 provides disabling this function in advance during "Time Delay" or the main
cooking programme. To activate this function press "Старт" during cooking. To enable "Keep
Warm" function press "Старт" button again.
Reheat
REDMOND RMC-М4510 can reheat cold dishes. To reheat a dish:
1. Fill the bowl with food and position it inside the multicooker.
2. Close the lid and plug in the appliance.
3. Press and hold "Отмена/Разогрев" button. The indicators will light up solid. The timer
The appliance will reheat food up to 70-75°С and will keep it warm during 12 hours. "Reheat" function
can be disabled by pressing and holding "Отмена/Разогрев" button, until the indicators go out.
"MASTERCHIEF LITE"
Discover more possibilities for culinary creativity with the new "MASTERCHIEF LITE" function!
While "МУЛЬТИПОВАР" allows setting a programme parameters before it starts, then
"MASTERCHIEF LITE" allows adjustments during the cooking process.
You can always adjust any programme, so that it corresponds to you wishes. Does your soup
boil over? Does your oatmeal "escape"? Are your vegetables steamed for too long? Adjust the
cooking temperature or time, without interrupting a cooking programme as if you cook on the
stove or in the oven.
Current time value is displayed during "Time Delay". To see the cooking end time press and
hold "Отсрочка" button. The function is available for all automatic programmes, except for
"ЖАРКА", "МАКАРОНЫ " and "ЭКСПРЕСС". Avoid using "Time Delay" function for perishable
meals (eggs, fresh milk, meat, cheese, etc.).
"Keep Warm" function is not applicable for "ЙОГУРТ", "МАКАРОНЫ", "ЭКСПРЕСС" and "МУЛЬ-
ТИПОВАР" programmes with the cooking temperature set below 80°С.
will start direct countdown of the reheating time.
The "Keep Warm" and "Reheat" functions enable the appliance to maintain the temperature of
a dish for 12 hours, however it is not recommended to keep a meal warm for more than 2-3
hours, because this may affect its flavour.
You can use "MASTERCHIEF LITE" only during cooking. "MASTERCHIEF LITE" is not applicable
for "ЭКСПРЕСС", "Time Delay" and waiting to access operating parameters.