Dreame Bot D9 Pro Benutzerhandbuch Seite 10

Routine Maintenance
EN
Clean the Main Brush
Press the brush guard clips inwards to remove the brush guard and
lift the brush out of the robot.
Pull out the brush cover as shown in the diagram. Use the included
cleaning tool to remove any hairs tangled in the brush.
Note: Do not pull out the hair excessively to avoid damaging the main brush
when the hair is tightly tangled in the main brush.
16
Clean the Side Brush
Pull out the side brush and use the included cleaning tool to remove
any hair tangled on the brush.
Clean the Main Wheel/Omnidirectional Wheel
Note: Use a tool such as a small screwdriver to separate the axle and the tire.
Routine Maintenance
Note: Wet cloths can damage sensitive elements within the robot and charging dock. Please use dry rags for cleaning.
Clean the Laser Distance Sensor/Returning-to-dock Sensor/Edge
Sensor
Clean the Cliff Sensor
Clean the Charging Contact
Robot Restarting
If the robot stops responding or cannot be turned off, press and hold
down the button for 10 seconds to forcefully turn it off. Then press
and hold the button for 3 seconds to turn the robot on.
Battery
The robot contains a high-performance lithium-ion battery pack.
Please ensure that it remains well-charged for daily use to maintain
optimal battery performance. If the robot is not used for an extended
period of time, turn it off and put it away. To prevent damage from
over-discharging, the robot should be recharged at least once every
three months.
EN
17