How To Use - Dreame Bot D9 Pro Benutzerhandbuch

Connecting with Mi Home/Xiaomi Home App
EN
This product works with the Mi Home/Xiaomi Home app. * Use the Mi Home/Xiaomi Home app to control your device and to interact with other
smart home devices.
1. Download the Mi Home/Xiaomi Home App
Scan the QR code to download and install the app. You will be
directed to the connection setup page if the app has been installed
already. Alternatively, search "Mi Home/Xiaomi Home" in the app
store to download and install it.
2. Add Device
Open the Mi Home/Xiaomi Home app, and tap " " in the upper right.
Then tap " " in the top right corner, scan the QR code, add "Dreame
Bot D9 Pro", and follow the prompts to finish the connection.
Note:
· Only 2.4GHz Wi-Fi is supported.
· The version of the app might have been updated, please follow the
instructions based on the current app version.
10
3. Reset Wi-Fi
Simultaneously press and hold the buttons and until you hear a
voice say, "Waiting for the network configuration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Wi-Fi Indicator
· Blinking slowly: To be connected
· Blinking quickly: Connecting
· On: Wi-Fi connected
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.

How to Use

1. Turn On/Off
Press and hold the button for 3 seconds to turn on the robot. Once
the power indicator turns solid white, the robot is in standby mode.
To turn off the robot, press and hold the button for 3 seconds when
the robot is not moving. Turning off the robot will end the current
cleaning task.
2. Start Cleaning
Press the button briefly to turn on the robot. Upon activation, the
robot will accurately map out a route, methodically clean each room
along the edges and walls, then finish by cleaning in an S-shaped
pattern to ensure a thorough job.
Note:
· Before a cleaning task, make sure the robot is fully charged and starts
from the charging dock. Do not move the charging dock while the robot is
cleaning.
· If the battery is too low, the robot will automatically return to the dock
to charge. It will resume unfinished cleaning tasks after charging to the
necessary battery level. (The breakpoint continuous cleaning function must
be enabled on the app in advance.)
3. Cleaning Mode
Dreame Bot L10 S has four cleaning modes: Quiet, Standard, Strong
and Turbo. The default mode is Standard. You can specify the
cleaning mode in the Mi Home/Xiaomi Home app.
4. Pause/Sleep Mode
Pause: Press any button to pause the robot during cleaning.
Sleep Mode: The robot will automatically enter Sleep Mode after 10
minutes of inactivity, then the power and charging indicators will go
off. To wake up the robot, press any button.
Note:
· The robot will turn off automatically if left in Sleep Mode for more than 12 hours.
· When the robot is paused, placing it onto the charging dock will end the
current cleaning task.
5. Do Not Disturb Mode
Do Not Disturb Mode prevents the robot from automatically starting
cleaning tasks, and the power indicator remains off. You can enable
Do Not Disturb Mode or modify its hours in the app. (The mode is on
by default from 22:00 to 08:00.)
Note:
· Scheduled cleaning tasks will still be carried out during the DND period.
· The robot will continue cleaning after the DND period ends.
EN
11