Other Safety Instructions - Nowy Styl XIO 2.0 Original Bedienungsanleitung

3.4 Sliding top lock release (for workstations with sliding top)
1. To release the slide lock pull the grip handle connected with the table top towards you and pull the table
top towards you.
2. To lock the table top again in a work position, push it in the opposite direction with both hands until the
slide lock dab the frame. To slide the table top into its final position, press the front recessed grip with
your thumb in the direction of the horizontal wire trunking until the table top is locked.
3.5 Other safety instructions
Read and keep the manuals in a safe place, accessible to users. Do not throw away the manuals.
No certified protection! Workstation is equipped with an anti collision protec-
tion system during up and down movement. However this is not considered as
personal protection.
Noise level: Electric motors in the lifting columns generate noise below the
measured values determined by the law. There is no danger hearing impairment.
Warning: Risk of the workstation fall and items falling off the table top
due to overload!
Warning: Risk of items falling off the table top and the workstation fall due to
overload! Items not evenly distributed or too heavy may result injuries and material
damage! Overload may also create an increse noise level. Please refer to the informa-
tion in the „Technical data" and distribute load evenly on the table top. Do not exceed
maximum load.
Danger: risk of crashing due to lack of safe distance! Ensure free movement of
the lifting columns and the table top by placing away other furniture in safe distance
of 25 mm. Make sure that no people, objects, building parts (e.g. ceilings, window
doors) or other types of obstacles under or above the table top are in the way of
height adjustment.
Warning: Risk of tripping due to loose cables! Make sure that all cables are properly
managed. If necessary contact authorized personnel to relocate cables.
EN 9