Saving A Selected Height - Nowy Styl XIO 2.0 Original Bedienungsanleitung

8.3 Saving a selected height setting
1. Use the "up" and "down" buttons to set the desired desk height – the height will be shown on the display.
2. Press the "logo" button.
3. Press one of the buttons with a number: 1, 2, 3 or 4.
The height setting will be saved under the selected number, and a symbol will appear on the display, e.g.
After approx. 2 seconds, the value of the saved height setting will appear on the display.
Height settings can be saved.
To set the workstation to a saved height setting press and hold the number button under which your selected
height has been saved until the desired height is reached.
If the button is released before the saved height is reached, the top will stop at the height at which the button
was released.
The "P" symbol will be shown on
the display.
.
EN 17