Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.2 Electrical components connection
Electric components was pre assembled and verified by the supplier during factory assembly. Howev-
er, electrical system defects may occur as a result of incorrect transport, installation or improper use.
To prevent:
| in case of suspect or seen defect (noises or smell), disconnect the power supply immediately. Notify other
users about the threat, mark the defective device and report the need for repair to authorized personnel,
| when setting up electrical devices (e.g. phones, monitors) connection cables length need to compensate
table top moves range of 660 mm,
| opening or any changes to electric components is prohibited
| in case of too loose connection of the electrical components notify authorized personnel,
do not allow water or other liquids (e.g. drinks, flower water) to contact with electrical devices (e.g. control
unit, lifting columns),
| before any changes to the workplace disconnect power supply. Before plugging power supply other cables
have to be properly connected first.
3.3 During installation and use
Improper leveling can cause serious damage or injuries. Notify authorized personnel to restore stability. When
placing other furniture parts and objects ensure the free movement of the lifting columns and table top.
Safety distance around the workstation
of 25 mm is required.
3.4 Sliding top lock release (for workstations with sliding top)
Before using sliding top function remove devices from the tabletop (e.g. monitors) cause they may fall and
cause damage or injuries. Children cannot play with the sliding top mechanism.
8 EN
Warning: 100 – 2 40 V AC – Risk of electric shock! Moisture, squashed or cut cables
can cause short circuits or fire. Contact with defective electric components may result
of serious injury or death.
Danger: risk of crushing due to incorrect installation!
Warning: Risk of crushing due to incorrect handling!
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
