Temperature Setting; Operation Parameters; Proper Storage - Pkm KG 230.4 A++ INOX DESIGN Bedienungsanleitung

4.3 Temperature setting

WARNING THE THERMOSTAT CONTROLS THE COMPRESSOR
ONLY. You must unplug the appliance to disconnect it from the mains.
0
1
7
1. The control range of the Thermostat is from setting 0 to setting 7. Move the
controller within this range only. Do not exceed settings 0 and/or 7 while
setting a temperature; otherwise the thermostat can be severely damaged.
2. In normal conditions the thermostat setting 2 to 4 is recommended to provide
effective food storage.
3. Colder settings can result in higher energy consumption.
4. If you choose a low temperature and some rime is generated at the back of the
appliance, we recommend to select a higher temperature.
 You can additionally use a fridge-thermometer
temperature.

4.4 Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. High ambient temperatures and simultaneously operating at the coldest setting
may make the compressor operate permanently to keep constant temperature
inside the appliance.
3. Defrost the freezer compartment regularly.

4.5 Proper storage

For proper air circulation, leave the glass shelf above the crisper in its position. The
other shelves are height-adjustable. Pull the shelf forwards until you can swivel it
6 Not included in delivery
Off
Highest temperature/warmest setting
Lowest temperature/coldest setting
36
6 to check the cooling