Temperature Setting; Operation Parameters - Pkm KG 238.4 A+++N IX Bedienungsanleitung

2. If the accessories inside the appliance are not fitted in their correct position,
replace them according to the image in chapter 4.
3. Use the freezer compartment 24 hours after initial operation of the appliance.
4. The appliance must be connected to the mains properly.
5. If the appliance was disconnected from the energy supply, wait 5 minutes
before restart.
6. Do not overfill the appliance

4.3 Temperature setting

Initial operation: Set the thermostat to the highest setting. Now let the empty
appliance operate for 3 hours. Then set the thermostat to the required position
from 1 to 7.
1. In normal conditions the thermostat setting 3 to 4 is recommended to provide
effective food storage. If you have chosen the higher settings 6 to 7, the storage
temperature may be close to 0°C or lower and the compressor may run
continuously.
2. If you choose a low temperature and some rime is generated at the back of the
appliance, we recommend to select a higher temperature.
 You can additionally use a fridge-thermometer
temperature.

4.4 Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. High ambient temperatures and simultaneously operating at the coldest setting
may make the compressor operate permanently to keep constant temperature
inside the appliance.
3. Defrost the freezer compartment regularly.
Not included in delivery
3
All manuals and user guides at all-guides.com
35
to check the cooling
3