Main Menu; Statistics; Settings - clage DEX Next Gebrauchs- Und Montageanleitung

3. How to use
Maximum temperature reached: The temperature cannot be increased any fur-
ther since the set temperature limit has been reached. The temperature limit
can be changed in the main menu via "Settings".
Heating activated: As soon as the appliance heats water, this symbol appears.
Power limit: The full output of the instantaneous water heater does not suffice
to heat the tapped quantity of water to desired temperature. Reduce the quan-
tity of warm water at the tap.

Main menu

Press the menu button to enter the main menu. All function menus and saved values of
the appliance can be selected from here.

Statistics

In the statistics the consumption and usage data are captured by the appliance and dis-
played in graph format:
Water consumption
Power consumption
Total consumption costs
to scroll through the different periods. The consumptions are dis-
Select or
played in diagrams over a period from the last drawing of water or the total consump-
tion.
Note: The consumption data are not suitable for billing purposes.

Settings

This menu is used for the basic configuration on the appliance. Select
scroll through the different menu items and tap "OK" to change settings directly or go
to submenus.
Temperature Unit: Defined as °C.
Language: Select the menu language.
Sound: Activate / deactivate operating sounds.
Note: Alarm signals and instruction sounds can not be disabled.
Currency: Select a currency symbol.
Temperature Limit: The temperature limit can be activated / deactivated in this menu
and the maximum warm water temperature can be limited to a desired value within the
temperature setting range.
Note: If the instantaneous water heater supplies a shower, then the maximum tem-
perature was limited during the installation of the appliance and can not be changed.
25
CLAGE
EN
or to