Data Maintenance; Communication - OHAUS Scout STX Serie Bedienungsanleitung

STX

5.2.4 Data Maintenance

Data Maintenance sub-menu:
Export to
USB
*Only available when USB Host is connected, and USB flash drive is installed.

5.2.5 Communication

Enter this menu to define external communication methods and to set printing parameters.
Data may be output to either a printer or PC
Factory default settings are shown in bold.
Notes: The RS232, Ethernet, Bluetooth, USB Device and USB Host menu is only available if the
optional Interface is installed.
Communication Sub-menu
RS-232 Print Settings
Choosing a Settings item brings up yet another menu level:
RS-232 Sub- Menu:
Baud Rate
Find Quality Products Online at:
Import from
Balance Info
USB
Export to USB*
Export data to USB flash drive. Two types of data can be exported:
- Application Mode Settings = APW, Ref.Weight etc.
- Menu Settings = balance setup functions etc.
Note: The function Save to USB needs to be set to ON to enable data transfer
to USB.
Import from USB*
Import data from USB flash drive
Application Mode Settings = import balance setup and application settings
Menu Settings = import menu settings
Balance Info
Information about the balance: Balance Type, Balance ID, Capacity, Readability
and software version.
Transmission
GlobalTestSupply
www.
Handshake
.com
sales@GlobalTestSupply.com
EN-31