Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
●
abnormal sound occurs
●
any accident or breakdown occurs
WARNING
Make sure that the tines are at a complete stop before
removing or installing the debris collector.
WARNING
Do not touch moving hazardous parts before the product
is disconnected from the power supply and the moving
hazardous parts have come to a complete stop.
OVERLOAD PROTECTION DEVICE
The product has an overload protection device. When
overloading is detected, the product will automatically turn
off. If the overload protector is actuated, the motor must be
allowed to cool down for 5 to 10 minutes.
Turn off the product and disconnect it from the power
supply. The tines are sharp; wear heavy-duty gloves before
touching. Make sure that the tines can rotate freely and is
not jammed or tight.
When the motor has cooled down, connect the plug to
the power supply and turn on the product. Press the start
button and then the on-off button to start the product. If the
product will still not start, have the product serviced by an
authorised service centre only.
GENERAL SCARIFYING TIPS
■
Adjust the cutting depth according to the needs of your
lawn and the length of the grass.
■
Mow your lawn and apply moss killer a week before you
plan to scarify if your lawn has a moss problem.
■
Water your lawn a few days before scarifying to make
sure your lawn is moist but not overly wet.
TRANSPORTATION AND STORAGE
■
Clean all foreign materials from the product. Store the
product in a cool, dry, and well-ventilated place that is
inaccessible to children. Keep the product away from
corrosive agents such as garden chemicals and de-
icing salts. Do not store the product outdoors.
■
For
transportation,
secure
movement or falling to prevent injury to persons or
damage to the product.
WARNING
Use extreme caution when lifting or tilting the product for
maintenance, cleaning, storage, or transportation. The
tines are sharp, keep all body parts away from the tines
while it is exposed.
MAINTENANCE
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can
cause injury, can contribute to poor performance, and
may void your warranty.
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed service
technician. Have the product serviced by an authorised
service centre only. When servicing, use only original
replacement parts.
■
■
■
■
■
■
■
■
■
the
product
against
CLEARING BLOCKAGES
■
■
■
■
WARNING
WARNING
When the product is stopped for servicing, inspection,
or storage, or changing an accessory, turn off the
power source, disconnect the product from the supply
and make sure that all moving parts have come to a
complete stop. Allow the product to cool down before
making any inspections and adjustments. Maintain the
product with care and keep it clean.
Check the debris collector frequently for wear, holes or
deterioration.
You may make adjustments and repairs described in
this manual. For other repairs, contact an authorised
service centre.
Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.
After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition.
Be careful during adjustment of the product to prevent
entrapment of the fingers between moving tines and
fixed parts of the product.
When servicing the tine assembly, be aware that
even though the power source is turned off, the tine
assembly can still be moved.
The tines on the product is sharp. Use extreme caution
and wear heavy-duty gloves when fitting, replacing,
cleaning or checking bolt security.
Turn off the product, and disconnect it from the power
supply.
Always wear heavy-duty gloves when checking or
clearing a blockage. The tines are sharp and the
blockage itself could be a sharp object.
Remove the debris collector, check for and carefully
clear obstructions.
Check for and carefully clear blockages in the grass
discharge chute.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English |
3
Werbung
Inhaltsverzeichnis
