Overload Protection; Transportation And Storage; Know Your Product - Ryobi RBV2800CSV Bedienungsanleitung

■ When feeding material into the product,
make sure that the pieces of metal, rocks,
bottles, cans, or other foreign objects are
not included.
■ Do not allow processed material to build
up in the discharge zone. This may prevent
proper discharge and can result in kickback
of material through the intake opening.
■ If the product becomes clogged, stop the
product and remove the battery pack before
cleaning the debris.

OVERLOAD PROTECTION

The product has an overload protection device
that is activated when overheating or when a
current spike occurs, automatically shutting
down power within the product. To resume
operation, disconnect the product from the
power supply, wait for about 15 minutes, and
reconnect the product to the power supply.

TRANSPORTATION AND STORAGE

■ Turn off the product, and allow it to cool
down before storing or transporting.
■ Remove all foreign materials from the
product. Store the product in a cool, dry, and
well-ventilated place that is inaccessible
to children. Keep the product away from
corrosive agents, such as garden chemicals
and de-icing salts. Do not store the product
outdoors.
■ For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
MAINTENANCE
■ Use only original
replacement parts,
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
■ Servicing requires
knowledge and should be performed only
by a qualified service technician. Have the
product serviced by an authorised service
centre only.
■ You may make adjustments or repairs
described in this manual.
6
Original Instructions
manufacturer's
accessories, and
extreme care and
■ After each use, clean the plastic parts with
a soft, dry cloth.
■ Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
■ Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
CLEARING A BLOCKAGE
1. To reduce the risk of injury associated with
contacting moving parts, always turn off
the product, remove the battery pack, and
make sure that all moving parts have come
to a complete stop.
2. Remove the blower/vacuum tubes to inspect
for blockage. Clear the tubes if required.
3. Remove the debris collector bag. Check
that the bag adaptor is free from obstruction.
4. Inspect the opening to the fan enclosure
and the tube to the debris bag for evidence
of a blockage. Remember, even though
the battery pack is removed, the fan or
mulching blades may move as you clear
any blockage. Keep fingers away from the
fan or mulching blades at all times.
WARNING! Do not attempt to remove the
fan or mulching blade. If it is necessary to
remove the fan or mulching blades, bring the
product to an authorised service centre.
5. Reinstall the tubes and the debris collector
bag before installing the battery pack and
starting the product.

KNOW YOUR PRODUCT

See page 135.
1. On/off switch and speed selector
2. Fan cover
3. Blow tube
4. High speed nozzle
5. Vacuum bag
6. Handle
7. Cord retainer
8. Bag adaptor
9. Upper vacuum tube
10. Lower vacuum tube
11. Operator's manual