Electronic Data; Materials - Invacare Aquatec Ocean E-VIP Gebrauchsanweisung

Aquatec® Ocean E-VIP
Relative humidity
Atmospheric pressure

9.3 Electronic Data

Operating voltage
Rated input power
Battery type
Typical operating time
Charger input
Charger output
Charge time from low-voltage warning approx. 5 – 6 h
Type of protection: drive, battery pack
and electronics housing
Type of protection: charger
Type of protection: entire device
Sound power level
1 Protected against the penetration of water in the
event if strong jets of water, tested under stipulated
weather conditions.
2 Protected from solid foreign bodies measuring 1.0
mm or more, not protected against the penetration
of water.
34
30 % - 75 %, non-condensing
795 - 1060 hPa
24 V
170 VA
Lead acid
40 cycles
230 – 240 V AC,
50 – 60 Hz
24 V DC, 12 VA
IP X6 W 1
IP 40 2
IP X6 W 1
52 dB(A)

9.4 Materials

Frame
Stainless steel, powder-coated
Seat plate Polypropylene
Backrest cover Nylon, PVC-coated
Footrests Polypropylene, fiber-glass reinforced
Armrest Polyamid, fiber-glass reinforced
Castors
Plastics and stainless steel
All product components are corrosion resistant and do not
contain natural rubber latex.
1556395-D