Connection To Tv Device - Canton Smart Soundbar 9 Kurzanleitung

English

CONNECTION TO TV DEVICE

HDMI (recommended)
®
Connect a HDMI
1
the Smart Soundbar 9 to the HDMI IN (ARC) input on your TV.
Now select the input [TV] by the Smart-remote using the up or down
2
arrow key „ / ".
Notes:
• A HDMI
®
It is the best option to connect your Smart Soundbar 9.
• If your TV features a HDMI
internal audio through your Smart Soundbar 9 by using this HDMI
• This HDMI
devices to the Smart Soundbar 9 inputs to display them on your TV.
• In this case, activate CEC mode on your TV. CEC (Consumer Electronics
Control) is a feature that allows compatible devices to be controlled from
a single remote control. For details, refer to the instruction manual of your
TV.
Optical digital input (alternative)
Connect the input OPTICAL at the Smart Soundbar 9 to the OPTICAL OUT
1
connector of your TV with an optical cable (TOSLINK).
On the Smart-remote, use the up or down arrow key „ / " to select the
2
input [CD].
Note:
• Make sure you have removed the protective caps from both ends of the
optical cable.
36
cable from the HDMI OUT (ARC) output on the back of
®
connection supports digital audio and video with a single cable.
®
connection is required if you intend to connect other video
®
ARC connector, you can enjoy also the TV
cable.
®