Connection To Tv Device; Connection To Other Devices - Canton Sound L Kurzanleitung

English

CONNECTION TO TV DEVICE

HDMI (recommended)
®
Connect a HDMI cable from the HDMI OUT (ARC) output on the back of
®
1
the Sound L to the HDMI IN (ARC) input on your TV.
Now select the input [TV] by the Smart-remote using the up or down
2
arrow key „ / ".
Notes:
• A HDMI connection supports digital audio and video with a single cable.
®
It is the best option to connect your Sound L.
• If your TV features a HDMI
®
internal audio through your Sound L by using this HDMI
• This HDMI connection is required if you intend to connect other video
®
devices to the Sound L inputs to display them on your TV.
• In this case, activate CEC mode on your TV. CEC (Consumer Electronics
Control) is a feature that allows compatible devices to be controlled from
a single remote control. For details, refer to the instruction manual of your
TV.
Optical digital input (alternative)
Connect the input OPTICAL at the Sound L to the OPTICAL OUT connector
1
of your TV with an optical cable (TOSLINK).
On the Smart-remote, use the up or down arrow key „ / " to select the
2
input [CD].
Note:
• Make sure you have removed the protective caps from both ends of the
optical cable.
32
ARC connector, you can enjoy also the TV
cable.
®

CONNECTION TO OTHER DEVICES

HDMI (recommended)
®
To connect other digital devices such as a satellite receiver, BluRay-player,
game console etc., it is recommended to connect these devices via one of
the 3 HDMI inputs of the Sound L.
®
Connect one of the 3 HDMI inputs (HD1/HD2/HD3) on the back of the
1 ®
Sound L with the HDMI OUT output on your digital device with a HDMI
cable.
Now, select the used input [BDP] for HD1, [SAT] for HD2 or [PS] for HD3
2
with the up or down arrow key „ / " on the Smart-remote.
Note:
• Make sure that you do not connect the other playback devices to the TV,
but directly to the Sound L. This is the only way to ensure that the best
possible multichannel audio format/audio signal is reproduced.
Optical digital input (alternative)
Connect the input OPTICAL at the Sound L to the OPTICAL OUT connector
1
of your digital source with an optical cable (TOSLINK)
On the Smart-remote, use the up or down arrow key „ / " to select the
2
input [CD].
Notes:
• If the optical digital input is already in use, please use one of the other
unused inputs (COAXIAL and/or AUX).
• Make sure you have removed the protective caps from both ends of the
optical cable.
English
®
3 3 3