Beko HCA92640BH Benutzerhandbuch Seite 14

5 Installation Of Appliance
Suitable
(Figure 12)
5.5 Installation of the Hood to
the Flue
Make the electrical connection of your
hood before starting the installation of the
flue. Slip the flue plates around the body.
Screw the flue to the flue fastening plates
available on the motor cabin. (Figure 13).
Install the flue to the flue fastening plate
that is secured to the wall from its upper
outer edges (Figure 13).
14 / EN
5.6 Installation of Air Baffle
While using with the carbon filter, air baffle
is provided with your appliance with the aim
of re-releasing the air which is cleaned with
carbon filter from the perforated located on
the flue. Assemble the air baffle as below.
Not suitable
(Fig. 14)
There is a tab in the middle of the flue con-
nection plate. Place the middle point of this
tab on the line that is drawn perpendicular to
the wall. Align horizontally and mark the holes
where the connection plate will be mounted
via a pen (Figure 14 / A, B).
Drill the marked points with Ø6mm drill and
insert two Ø6mm plastic dowels in the drilled
holes (Figure 14 / A, B).
Fix the flue connection plate to the wall with
3.9x22 screws (Figure 14/ A, B).
For air baffle assembly, install point C, D, E,
F with Ø6mm drill and Ø6mm plastic dowels
(Figure 14).
Assemble cooker hood's body (Page 14 / Fig-
ure 10).
(Figure 13)
Cooker Hood / User Manual