Installation Accessories; Wall Mounting - Beko HCA92640BH Benutzerhandbuch

5 Installation Of Appliance
WARNING!
A
Before starting the installation,
read the safety information on
User Manual.
WARNING!
Failure to install with screws and
A
stabilizers in accordance with
these instructions may result
in electric shock.
For the installation of the hood, please
contact the nearest Authorized Service.
It is the customer's responsibility to pre-
pare the location and electrical installation
of the hood.
5.1 Position of the Appliance
(Figure 6)
Distance between the cooker and the
•
cooker hood must be considered prior
to assembly. This distance should be 65
cm (Figure 6).
Distance must be measured from the
•
surface of grate for gas cookers,
from surface of glass for electric cook-
•
ers.
Cooker Hood / User Manual

5.2 Installation Accessories

11 12 13
1. Product
2. Outer Flue
3. Inner Flue
4. Flue Connection Plate
5. Ø150/120mm Flue Adapter
6. User Manual
7. Assembly Pattern
8. 4 x Ø8mm Plastic Dowel
9. 6 x Ø6mm Plastic Dowel
10. 4 x 4.8 x 50 Wall Mount Screw
11. 6 x 3.9 x 22 Flue Connection Plate
Screw
12. 4 x 3.5 x 9.5 Flue Connection Screw
13. Ø120mm Flue Adapter
14. Ø150mm Plastic Flue Adapter
(Option)
15. Chimney Clamp
16. Air Baffle
The information required to make the lo-
cation suitable for the installation of the
hood is given below.

5.3 Wall Mounting

Wall must be flat, straight and have the
•
sufficient bearing capacity.
Depth of drilling holes must comply with
•
14 15 16
11 / EN