Operating Hazards - Parkside PDT 40 F4 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Safety instructions for the fastening device
Only technically-trained users

should use the fastening
device.
Do not carry out any altera-

tions to the fastening device.
Alterations can reduce the effi -
ciency of the safety measures
and increase the risk for the
user and/or another person.
Keep away from other people

(if you are working in an
environment where there are
likely to be people passing).
Clearly mark your work
station.
Never aim at yourself or others

with the device.
 Operating hazards
Always make sure your footing

is secure and maintain your
balance at all times.
Hold the fastening device

when working such that if
there is a possible recoil due
to a fault in the power supply
or due to hard points in the
workpiece, your head and
body cannot be injured.
Never shoot the fastening

device into the air. You will
thus avoid the hazard due to
fl ying objects and overloading
the device.
36 GB/IE
To transport the fastening

device, disconnect it from
the compressed air supply,
particularly if you are using
ladders or if you have to move
around with your body in an
unusual position.
At the work station, only carry

the fastening device using the
handle and do not have the
trigger pressed.
Take the work station condi-

tions into account. Fasteners
may possibly punch through
thin workpieces or may slip
you are when working on cor-
ners and edges of workpieces
and this could put individuals
in danger.

for your personal protection,
such as, for example, ear
protectors and eye protection.
Depending on the type of
fastening device and how it is
used, wearing personal protec-
tive equipment such as a dust
mask, non-slip safety shoes, a
hard hat and hearing protec-
tion can lessen the risk of
injuries.
Hold the device properly, in

order to be able to react to
Use the appro-
priate protec-
tive equipment