ABB ACS580-01 Kurzanleitung Für Die Installation Seite 322

322
2 – Additional settings: Start, stop and reference values
If you do not wish to use a macro, define the
settings for start, stop and reference:
Select Start, stop, reference and press
R0-
(Select) (or
R4
R1-
R9
Adjust the parameters according to your needs.
Select a parameter and, depending on the
parameter type, press
(Select) (or
EN
When you change the settings, you also change
the use of the I/O signals in the drive. Make sure
DA
the actual I/O wiring and the use of I/O in the
control program match each other. You can check
DE
the current I/O use in the I/O menu under the
Main menu.
ES
After making the adjustments, go back to the
Primary settings menu by pressing
(Back).
FI
FR
Select Ramps and press
IT
NL
PL
PT
RU
Adjust the parameters according to your needs.
Select a parameter and press
SV
After making the adjustments, go back to the
Primary settings menu by pressing
TR (Back).
ZH
).
(Edit) or press
).
2 – Additional settings:
(acceleration and deceleration times for the motor)
(Select) (or
Ramps
).
(Edit).