ABB ACS580-01 Kurzanleitung Für Die Installation Seite 320

320
Check that the motor data is correct. Values are
predefined on the basis of the drive size but you
should verify that they correspond to the motor.
Start with the motor type.
Motor nominal cosΦ and nominal torque are
R0-
optional.
R4
Press
R1-
R9
This step is optional, and requires rotating the
motor. Do not do this if it could cause any risk, or if
the mechanical set-up does not allow it.
To do the direction test, select Spin the motor
and press
EN
DA
Press the Start key
DE
drive.
ES
FI
FR
IT
Check the direction of the motor.
If it is forward, select Yes, motor is spinning
NL
forward and press
If the direction is not forward, select No, fix
PL
direction and press
PT
RU
If you want to make a backup of the settings made
so far, select Backup and press
SV
If you do not want to make a backup, select Not
now and press
TR
ZH
(Next) to continue.
(Next).
on the panel to start the
(Next) to continue.
(Next) to continue.
(Next).
(Next).