Cleaning; Troubleshooting - Silvercrest SBTF 10 F2 Bedienungsanleitung Und Sicherheitshinweise

10.2 Cleaning

WARNING! Disconnect the hands-free kit from the power supply before cleaning in
order to avoid hazards. Use a dry cloth for cleaning and never use solvents or
cleaning agents that react with plastics. Ensure that no liquids enter the housing. If the
hands-free kit is heavily soiled, use a very slightly moistened cloth.

11. Troubleshooting

All the functions described depend on the range of functions available on the
mobile phone you are using. Not all functions may be supported.
The hands-free kit doesn't seem to be working
• Check whether the lithium ion battery is charged. Charge the battery if necessary.
• Check whether the hands-free kit is switched on and connected to your mobile phone.
The lithium-ion battery won't charge
• Check whether the car charger adapter (B) is plugged into your in-car socket correctly.
• Check that the large USB plug of the charging cable (C) is correctly inserted in the car
charger adapter and the small plug of the charging cable (C) is correctly inserted in
the micro USB charging port (7) of the hands-free kit.
• Turn on the ignition, as some vehicles will only power the in-car socket when the
ignition is on.
• Check whether the LED of the car charger adapter (B) lights up green. If this is not the
case, the car charger adapter (B) may be defective.
SilverCrest SBTF 10 F2
English - 55