Cleaning - Silvercrest SBF 2 B2 Bedienungsanleitung

The white LED in the housing of the USB
charger
connected
The USB charger
♦
longer charge the attached devices. The internal
overcurrent protection has been triggered.
Disconnect all connected devices from the USB
charger
and the USB charger

Cleaning

CAUTION
To avoid irreparable damage to the appli-
►
ance, make sure that no moisture gets into it
during cleaning.
Do not use caustic, abrasive or solvent-based
►
cleaning materials. These could damage the
surfaces of the device.
SBF 2 B2
goes out when a device is
is overloaded and will no
. The white LED lights up immediately
is ready for use.
GB │ IE │
75 ■