Establishing Connection With Compatible Mobile Phones - Silvercrest SBTF 10 F2 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SBTF 10 F2
To set the desired language, proceed as follows:
In standby mode, press the mute/language selection button (8) for about one second to go
to the first language announcement. If it is your desired language, you do not have to do
anything else, the language is adopted directly.
However, if you want a different language, press the mute/language selection button (8)
again for about a second to hear the next selection. Continue in the same way until you
have set the desired language.

9.3 Establishing connection with compatible mobile phones

Pairing/Connecting
Only on first use and following a reset to factory settings, the hands-free kit will start directly
in pairing mode after turning it on with the ON/OFF button. The phone button (4) flashes
alternately orange and blue. In addition, the announcement is made that the device is
ready for connection.
® ®
Activate the Bluetooth function of your mobile phone and let it search for Bluetooth
devices nearby. To do so, refer to your mobile phone manual. Select the device 'SBTF 10
F2' from the list of detected devices.
Enter '0000' if you are asked for a PIN during the pairing process.
English - 45