Intended Use; Product Liability - GEZE F 1200+ Originalbetriebsanleitung

Intended use

1.5 Terms
Term
Window unit
Drive system
2 Intended use
A window unit is made up of the F 1200+ drive, the F 1200 fitting and a window for the private and commercial
sector. The drive system is used for the electromotive opening and closing of the windows. The window units
have been designed for permanent installation and vertical installation in the façade and are suitable for large
side-hung or bottom-hung leaves:
à Drive system for daily ventilation and exhaust
à The F 1200+ drive is not approved for use in fire protection applications (such as e.g. smoke and heat extraction
system, SHEV etc.).
à The F 1200+ drive can be used as an individual drive (solo drive) on a window.
à Multiple installation of two or more drives of this type on one window is not permitted.
à The drive system is designed solely for use in dry rooms and must not be subjected to highly corrosive envi-
ronments (e.g. sea air or marine air).
Any other use or use beyond this purpose is regarded as not to the intended use.
3

Product liability

In compliance with the liability of the manufacturer for his products as defined in the German "Product Liability
Act", compliance with the information contained in this brochure (product information and intended use, misuse,
product performance, product maintenance, obligations to provide information and instructions) must be ensured.
Warranty claims require proper fitting, installation and maintenance in accordance with the manufacturer's
specifications.
Failure to comply releases the manufacturer from his statutory liability.
à GEZE shall assume no liability for damage caused by unauthorised changes to the window unit.
à GEZE does not accept any warranty for combinations with third-party devices and products.
18
Explanation
Mounted unit comprising drive system and window
F 1200+ drive and F 1200 fitting
F 1200+