Olivetti Artjet 22 Installationsanleitung Seite 5

Presentation
Œ

Ž


(
) Main automatic feeder (paper tray mounted) - ( ) Output tray/Second automatic feeder (paper tray mounted)
! "
( ) Margin guide - ( ) Print head carriage (print heads inserted) - (
%
( ) Operator panel (two buttons and a light indicator) - (
'
( ) Manual feeder - ( ) Release button (to free jammed paper, if necessary)
Connect the printer to the
electrical power supply
1. Insert the small two-pin connector of the
power cable in the socket on the rear the
printer.
2. Plug the other end of the cable into an
independent wall socket.
The "Power" button (
electrically disconnect the printer from the
power supply. To electrically disconnect the
printer, you must unplug the power supply
cable from the power outlet.
2
#
) Print head release lever - (
&
) Print head rest position (under the printer casing)
) does not
‘
’
“
”
•
$
) Cover (open)
Installation Guide