Load Paper - Olivetti Artjet 22 Installationsanleitung

Load paper

The figures in this section show the printer in its
horizontal position.
1. Push up the output tray, to simplify access to
the main automatic feeder.
2. Pull out the adjustable rear guide on the paper
tray of the main feeder and make sure that the
adjustable margin guides are completely
open.
3. Fan the paper and load it as a single pack into
the main feeder, inserting it carefully until it
stops inside the printer.
Do NOT load paper above the maximum level
indicated on the inside of the feeder.
The printing surface must face towards the
tray.
Installation Guide
4. Close the adjustable margin guides against
the edges of the paper and the rear guide
against the trailing edge.
5. Return the output tray to its operating
position and make sure that its lateral and
rear guides are open.
The priority of paper insertion is determined
automatically by the printer: a single sheet in
the manual feeder will always have first
priority over paper in the second and main
automatic feeders, in this order.
See the specific sections in this booklet for
paper insertion from manual and second
feeders. For the media types and formats
you can use, consult the On-Line Help loaded
with the printer driver.
GB
7