Safety Information For The Installer - Sentiotec Infrabox basic S Bedienungsanleitung

Instructions for installation and use

2.2. Safety information for the installer

● The clamping connections may only be installed by a qualified
electrician or similarly qualified person.
● The plugs connectors may be installed by the user.
● Installation and connection of the infrared control unit may only
be performed when the power supply is disconnected.
● Also comply with the regulations applicable at the installation
location.
● Before the infrared controller is switched on, make sure that no
flammable objects have been hung over the infrared heater or
on the infrared plate.
● For your own safety, consult your supplier in the event of prob-
lems that are not described in sufficient detail in the installation
and operating instructions.
p. 7/32
EN