Weidmuller UCV/R Bedienungsanleitung Seite 20

SetupSequence(continued)
Coil energisation
Alarm type
Setpoint value
Deadband value
Timer delay
Coil energisation
Alarm type
Setpoint value
Deadband value
Timer delay
Alarm reset
sequence
Setpoint
security
Save values
20
Normally energised
A1nE
Normally de-energised
A1nd
Low type (active below setpoint)
A1=L
High type (active above setpoint)
A1=H
Setpoint value
SP1=
e.g., 50.0 %
50. 0
Deadband value
db1=
e.g., 0.1 %
0. 1
Timer delay (set to 0 s to disable)
dL1=
e.g., 20 s
20
Normally energised
A2nE
Normally de-energised
A2nd
Low type (active below setpoint)
A2=L
High type (active above setpoint)
A2=H
Setpoint value
SP2=
e.g., 50.0 %
50. 0
Deadband value
db2=
e.g., 10.0 %
10. 0
Timer delay (set to 0 s to disable)
dL2=
e.g., 20 s
20
Generalalarmsettings
Automatic reset
nOr
Manual reset
rES
Setpoints fixed at setup
SECy
Can change setpoints
SECn
Instrument is saving the changes to the setup and returning to normal
SAVE
operation
Alarmchannelone
Alarmchanneltwo
Toggle Accept
Toggle Accept
- - Next
Dec Inc Accept
- - Next
Dec Inc Accept
- - Next
Dec Inc Accept
Toggle Accept
Toggle Accept
- - Next
Dec Inc Accept
- - Next
Dec Inc Accept
- - Next
Dec Inc Accept
Toggle Accept
Toggle Accept