Power Saving - Cavecool CC34SB Gebrauchsanleitung

- Keep the appliance away from candles, luminaries and open flames, in order to avoid fire risk.
- This appliance is only designed
- The appliance is heavy. Be careful when moving it.
- If your appliance is equipped with castors, remember that these are only designed to facilitate minor
movements. Do not move the appliance over long distances.
- Do not lean or climb on the appliance or its elements.
- In order to avoid falling objects and to prevent damage to the appliance do not overload the
compartments of the appliance.
Caution! Cleaning and servicing
- Before carrying out servicing, switch off the power supply and disconnect the appliance.
- When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic
solvents or abrasive substances.
- Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
-
To ensure proper electrical connection, follow the recommendations given in this manual.
- Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the packaging.
- It is recommended that the appliance be allowed to settle for at least 4 hours before connecting the
electrical power supply, so that the compressor fluid feed is correct.
- Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe the
installation recommendations provided.
- In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls or
with any hot element (compressor, condenser). Observe the installation recommendations.
- The appliance should not be placed close to radiators or cooking hot plates or gas
- Check that electrical sockets remain accessible when the appliance is installed.
- Plug the wine cooler into a properly installed wall outlet with an earth/ground connection plug. Any
questions concerning power should be directed toward a certified electrician or an authorized
products service center.

Power saving

To limit the electricity consumption of your appliance:
- Install it in an appropriate place (see "Installing your appliance").
- Leave the doors open as little time as possible.
- To ensure that the appliance operates properly, clean the condenser regularly (see "Routine
servicing of your appliance").
- Regularly inspect the door seals and ensure that they are still closing properly. If this is not the
case contact your after-sales service.
to store wines and drinks.
4
rings.